Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4. Peel off the the film of silicone pad and stick it on the front facing surface of the SSD
5. Reinstall the panel and power on the NAS. After successful boot up, go to the
to set the SSD cache
AWarning
To avoid data loss, please remove the SSD cache in the "UGREEN NAS" before
removing any M.2 SSD. This will provide added protection
using it for caching.
"UGREEN NASI' app
in case the system is
Powering
On
Use Ethernet cable to connect NAS to a LAN port on a router. Connect the power adapter to the device,
then short press the power
button to turn it on
ips: After powering on, you can download "UGREEN NAS' then go to "Control Panel" > "Hardware &
Power" to select automatic
startup
after powering
o
LAN
AWarning
To avoid potential fires, explosions,
use non-Ugreen
power adapters or uncertified
on.
o
Included
power
adapter
(DC 12V/10A)
or other electrical
hazards, please do NOT
power adapters.
12
Werbung
