Werbung
Verfügbare Sprachen
Verfügbare Sprachen
About
the
DXP4800
UGREEN DXP4800 is a network attached storage device designed for home and personal users The
DXP4800
works as an intelligent
data management
smartphones,
laptops,
tablets, and TVs anywhere
Instructions
Before
Use
• In order to ensure data transmission efficiency, it is recommended to use a router or switch with Gigabit LAN
ports or higher and to connect the NAS using the included Ethernet cable (CAT 7 or higher)
• It is recommended
to use new hard drives. When installing ANY drive(s), the NAS system will format the drive,
erasing ALL existing data Ensure any important data is backed up prior to installation
• Please only use the original power adapter, or a safety certified power adapter, that meets the power
specifications
for this device.
• Do not insert or remove hard drives when NAS device is on If necessary, please turn off the device first by
using the app to prevent potential file loss, data corruption, or drive damage
• ONLY update firmware
with a stable power supply. Do NOT disconnect
process
• After unbinding the device, all data will be removed and can NOT be retrieved Ensure data is backed up
appropriately
before unbinding the device.
center where users can store and access data via
there is network
access.
the power supply during the update
Package
Contents
UGREEN
1xNetwork Attached Storage
IxUser
1
Adapter
2><Ethernet
Cable
(DC 12V/10A )
(CAT7)
I xWarranty Card
Manual
Drive Tray Key
2><SSD Silicone
Pad
Screws
(For Thermal
Conduction)
Screwdriver
(For 2.5-inch
Hard Drive Installation)
&
Werbung
