Product Specifications - Dima Dd-200 Gebrauchsanweisung

• Never point the hot air pencil to any part that can burn.
• Only place the machine (especially the DD-400) on a place where it can cause no fire.
1.3

Product Specifications

Dimensions
DD-200/210/300
DD-400
Height of DD-400 with antenna
Remark: height measured with front legs in extended position.
Weight
DD-200/210/300
DD-400
Power Requirements
DD-200
DD-210
DD-300
DD-400
Refer to section 2.5.1 for details about adjusting your digital dispenser to your power supply.
Pneumatic Specifications
Required air pressure
Required air filtering
Air flow DD-200/210
Air flow DD-300
Air flow DD-400
Vacuum at machine back
Temperature Requirements
Operating ambient temperature
Time Specifications
Control
Tolerance with set time 0.001 - 9.999 : ± 0.001 seconds
Tolerance with set time 10.00 - 99.99 : ± 0.01 seconds
Range dispense time
Range interval time
Initiations
4
DD-200 .. 400 User Manual Ver1.0
: 370 x 260 x 120 mm (L x W x H)
: 450 x 260 x 120 mm (L x W x H)
: approx. 450 mm
: 5.4 kg
: 7 kg
: 115 Volt, 60 Hz, 50 W
230 Volt, 50 Hz, 50 W
: 115 Volt, 60 Hz, 50 W
230 Volt, 50 Hz, 50 W
: 115 Volt, 60 Hz, 50 W
230 Volt, 50 Hz, 50 W
: 115 Volt, 60 Hz, 120 W
230 Volt, 50 Hz, 120 W
: 6 Bar / 85 PSI
: 5 micron or smaller
: max. 17 l/min
: max. 34 l/min
: max. 44 l/min
: max. 0.75 ±0.1 Bar / 10.6 ± 1.4 PSI
: 5 °C to 35 °C
: digital solid state electronics
: 0.001 - 99.99 seconds
: 0.001 - 99.99 seconds
: manually (by foot pedal) or timer controlled