2.
Install Battery.
3.
Turn Power Button to the "ON" position.
4.
Ensure
selected. If not, see Throttle operation and Changing Power
Mode sections in this manual.
5.
Adult should supervise child as the top speed and
acceleration have both increased in this mode.
6.
The child must demonstrate the ability to roll off throttle and
use the brake to slow to a stop, and maintain a safe distance
for obstacles and other riders.
• Advanced Mode - This mode is for advanced and older riders only.
1.
Turn Power Button to the "OFF" position.
2.
Install Battery.
3.
Turn Power Button to the "ON" position.
4.
Ensure
selected. If not, see Throttle operation and Changing Power
Mode sections in this manual.
5.
Adult should supervise child as the top speed and
acceleration are at their maximum in this mode.
6.
The child must demonstrate the ability to roll off throttle and
use the brake to slow to a stop, and maintain a safe distance
for obstacles and other riders.
SAFELY APPROACHING OR RE-MOUNTING THE CYCLE:
During adult supervision, always teach children to approach the cycle with caution
before use, while standing back up if knocked over, or after a spill.
1. Carefully place the Power Button into the "OFF" position.
2. Ensure all wheels/tires and drive train components have stopped
rotating or moving.
3. Perform a "Pre-Ride Inspection" (below) and explain and reinforce
proper inspection steps with child.
4. Have rider mount the cycle, gripping the handlebars with both hands,
sitting on the saddle with both feet flat on the ground.
5. Place the power button into the "ON" position.
6. Finally: carefully resume riding your cycle.
LOADING AND UNLOADING A CYCLE INTO A VEHICLE:
1. Place the Power Button into the "OFF" position.
2. Remove battery.
3. Load into vehicle for transport.
4. After unloading, ensure Power Button is in "OFF" position.
5. Install battery.
6. Perform Pre-Ride Inspection.
FAILURE TO USE COMMON SENSE AND HEED THE ABOVE WARNINGS
INCREASES RISK OF SERIOUS INJURY. USE WITH APPROPRIATE CAUTION AND SERIOUS ATTEN-
TION TO SAFE OPERATION. ALWAYS STOW BATTERY OUT OF REACH OF CHILDREN.
YELLOW
LED is lit, indicating "Standard Mode"
GREEN
LED is lit, indicating "Advanced Mode"
P a g e |
19