Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
4. Intended use
The equipment is designed to remove weeds from
between paving stones and slabs. It is not intended
for use on sensitive surfaces like tiles.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Technical data
Mains voltage:
Power input:
Idling speed:
Max. brush diameter
Protection class:
Weight:
Sound and vibration
Sound and vibration values were measured in
accordance with EN 60745.
Sound pressure level L
Uncertainty K
pA
Schallleistungspegel L
WA
Unsicherheit K
WA
Wear ear-muffs.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60745.
Surface grinding
Vibration emission value a
K uncertainty = 1.5 m/s
12
230-240 V~ 50 Hz
1200 min
100 mm
68 dB(A)
pA
88 dB(A)
≤ 2.5 m/s
2
h
2
Additional information for electric power tools
Warning!
The specified vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equipment
is used and may exceed the specified value in
exceptional circumstances.
The specified vibration value can be used to compare
the equipment with another electric power tools.
Reduce noise generation and vibration to a
minimum!
Use only equipment that is in perfect condition.
Maintain and clean the equipment regularly.
Adopt your way of working to the equipment.
Do not overload the equipment.
Have the equipment checked if necessary.
Switch off the equipment when not in use.
Wear gloves.
Residual risks
Even if you use this electric power tool in
140 W
accordance to instructions, certain residual risks
-1
cannot be eliminated. The following hazards may
arise in connection with the equipment's
construction and layout:
II /
1. Lung damage if no suitable protective dust mask
1.9 kg
is applied.
2. Damage to hearing if no suitable ear protection is
applied.
3. Health damage caused by hand-arm vibrations if
the equipment is used over a longer period or is
not properly guided and maintained.
6. Before starting the equipment
3 dB
Before you connect the equipment to the power
supply make sure that the data on the rating plate
3 dB
are identical to the supply voltage.
Always pull out the power plug before making
adjustments to the equipment.
Plug the top part of the housing (Fig. 3a/Item A) and
the bottom part of the housing (Fig. 3a/Item B)
together and secure with one screw on each side
(Fig. 3b/Item 10).
Insert the guide wheel (Fig. 4/Item 4) into the guide on
the housing (Fig. 4/Item A). Make sure that there is an
audible click when it engages.
Werbung
Kapitel
Inhaltsverzeichnis
