MAJORITY Quadriga Benutzerhandbuch Seite 16

CD Player
EN
The smart radio can playback CD-DA (Compact Disc Digital Audio) format audio CD-
R/CD-RW discs that have been finalised* upon completion of recording.
It may fail to play some CD-R/CD-RW discs due to poor recording and wide variation
in quality of the CD-R/CD-RW disc.
*Finalising enables a CD-R/CD-RW disc to playback on audio players. A disc which
has not been finalised may have information added to it using a computer but may not
always be playable.
Insert a disc with printed side facing up into the CD slot. The disc will be automatically
loaded. The unit will check the CD type and load its track list. The display will show
'Loading' and then 'Reading' as the information is read.
Playback
Rotate the NAVIGATE knob or 7 / 8 on the remote control to play the previous or
next track, press and hold the button to rewind or fast forward.
Press NAVIGATE knob or 12 on the remote control to pause the track. Press it again
to resume.
Press 3 to stop the track.
To remove the CD, press 3 .
Note: Majority Quadriga will not eject the CD if it is not in CD mode.
Repeat/Shuffle - Press REPEAT/SHUFFLE on the remote control to swap among
normal playback, repeat one, repeat all and turn on/off the function of random.
CD track programming - Stop the playback first if any track is playing. Press FAV to
program.
Set the first programming track, use 7 / 8 to search for the audio track. Press OK to
confirm then set the next programming track. Repeat the steps. When programming is
completed, press b .
Press OK to start playing the programmed track(s).
16