Werbung
Verfügbare Sprachen
Verfügbare Sprachen
(Original instructions)
E N
Description
A - Digital display
B - Temperature selector
C - Power selector
D - On/off button
E - Air inlet
F - Concentrator
G - Diffuser
DIGITAL SCREEN
1 - Temperature
2 - Power
3 - Cold air mode
If your device model does not have the
accessories described above, these can
also be purchased separately from the
Technical Assistance Services or from the
website www.solac.com
USE AND CARE
Before each use, fully extend the power
cord of the appliance.
Do not use the device if its accessories
are not properly attached.
Do not use the appliance if the
accessories attached to it are defective.
Proceed to replace them immediately.
Do not use the appliance if its start/stop
device does not work.
Unplug the appliance from the mains
when not in use and before carrying out
any cleaning, adjustment, charging or
changing accessories.
Keep this appliance out of the reach of
children and/or people with reduced
physical, sensory or mental capabilities or
lack of experience and knowledge.
Do not store the appliance if it is still hot.
Check that the ventilation grilles of the
appliance are not obstructed by dust, dirt
or other objects.
Keep the device in good condition.
Check that moving parts are not
misaligned or stuck, that there are no
broken parts or other conditions that could
affect the proper functioning of the
appliance.
Do not leave the device running while
resting on a surface.
Do not use the device while it is running
while resting on a surface.
Do not use the appliance to dry pets or
animals.
Do not use the appliance to dry textile
garments of any kind.
How to use
BEFORE USE
Make sure you have removed all
packaging material from the product.
Some parts of the appliance have been
lightly oiled, consequently, when you start
the appliance for the first time it may give
off a slight smoke. After a short time this
smoke will stop.
USE
Fully extend the cable before plugging in.
Plug the device into the electrical network.
Orient the device to direct the air flow in
the desired direction.
Start the device by pressing the on/off
button (D) for 3 seconds.
Select the desired temperature by
repeatedly pressing the button (B). The
selected temperature will appear on the
digital display at all times (100ºC, 80ºC,
60ºC, cold air).
Select the desired power by repeatedly
pressing the button (C). The selected
power will appear on the digital display at
all times (soft air, medium soft air, fast
air).
The maximum operating temperature
under normal conditions is up to 100ºC.
Werbung
