Ednet Universal Benutzerhandbuch Seite 11

F Display the code
Press and hold the device button ( TV), Simu taneously press button I
thousands of the 4-figure code, Count how often the LED flashes, if the LED does not
flash, the number
2 Press and hold the device button ( TV), simultaneously
hundreds of the 4-figure code, Count how often the LED flashes, if the LED does not
flash, the number
3 Press and hold the device button ( TV), simultaneously
tens of the 4-figure code, Count how often the LED flashes, if the LED does not flash,
the number
Press and hold the device button ( TV), simultaneously
4
ones of the 4-figure code, Count how often the LED flashes
For example for Code 0169
1 Press TV
2 Press TV
3 Press TV
5 Press TV and
All Off Function
This function can turn off all devices simply by press ALL-OFF button Press All-Off button for
one second, this button WI start to send out Turn off signal for all devices, LED start to flash at
the same time When all devices are turned off, LED finish flashing
H Reset I Delete Function
Just simply press device (TV) button and Button Otogether,
all settings will be deleted, and remote go back to factory default settings
I Low Battery Indication
If the LED on the remote contro start to be flashing automatica y, that means you need to
change to use new battery now
is Zero then
is Zero then
is Zero then
and 1 LED flashes
and 2 LED flashes
and 3 LED flashes
4 LED flashes Nine
Zero time
One time
Six times
times
10
to display the
press button 2 to display the
press button 3 to display the
press button 4 to display the
LED flashes three times, now