Use
The corkscrew is suitable for bottle necks with a
maximum outer diameter of 1.37 inch and an inner
diameter of 0.7 to 0.9 inch.
➀
➁
➂
➃
10
➀
Detach the foil cutter from
the corkscrew and place it
horizontally on the neck of the
bottle. Squeeze it slightly with
one hand so that the blades
rest against the foil. Now grasp
the bottle with the other hand
and cut off the foil.
➁
Hold the bottle with one hand
and
place
vertically on the bottle neck.
➂
Keep the lower part of the start
button pressed and apply a
little downward pressure at the
same time. The spiral turns into
the cork and pulls it out. Once
the cork is completely pulled
out of the bottle, the corkscrew
stops automatically. Release
the start button and remove
the corkscrew from the bottle.
➃
To twist the cork out of the
corkscrew, keep the upper part
of the start button pressed.
the
corkscrew