Maintenance; Guarantee - Spinder Rt1 Montageanleitung

MAINTENANCE

Always store the bike carrier clean and dry after use. If necessary spray with the
water hose to remove mud and other filthy stuff.
Check the bike carrier regular if there is any damage. Damaged or worn parts
need to be replaced immediately. Use only original replacement parts.
The tension bolts and quick-release levers of the bike carrier need to be checked
regular, if necessary tighten them again.
If there is a damage on the powder coating of the bike carrier this needs to be
treated with paint immediately.
Rotating and moving parts need to be kept clean.

GUARANTEE

This product is covered by a 2 year warranty. Please note that our guarantee
covers reasonable use of the bike carrier, it does NOT cover any damage caused
by misuse. This also applies to a malfunction or failure of the bike carrier that
has been caused by poor or incorrect installation. To ensure the validity of the
guarantee please carry out maintenance in accordance with the maintenance
section. Warranty claim without proof of purchase is not possible. We reserve the
right to make a call out and/or repair charge for any work required to be
undertaken to rectify faults that are outside of the company's control i.e.
incorrect or poor fitting, misuse, accidental damage, etc.
24