Attaching Of The Bike On The Bike Carrier - Spinder Rt1 Montageanleitung

ATTACHING OF THE BIKE ON THE BIKE CARRIER

Step 1
Lift your bike with the front wheel towards the
front onto the rail of the bike carrier and place
the front wheel directly above the front roof
bar. Now slide the wheel holder attachment in
the large front wheel support down until it fits
tightly on the bicycle tire.
Step 3
Slide the rear wheel stopper to the position
directly under the rear wheel and close the
fixation strap. Pull it firmly.
Step 2
Then swing the small front wheel support towards
the tire and press it firmly. Make sure that the
wheel of your bike is well blocked (and the bike
cannot move forward/backward in the wheel
holder).
21