Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
WARNING
Before every use, make sure that:
•
•
•
•
•
CAUTION
When the device is turned on or off, it may emit a sound. This is the material
expanding and shrinking during heating and cooling down.
CAUTION
The day and time settings will be reset to default if the device is switched by
using the ON/OFF switch or by unplugging it. The week timer set via the
remote control is automatically deleted.
1.
Set the main switch to the ON position on
the device (figure 17, pos. 1).
2.
The display (figure 17, pos. 2) will show OFF.
3.
Press the ON/OFF button on:
•
the control panel (Figure 17, pos. 2) or;
•
the remote control (Figure 7, pos. 1).
4.
The device starts heating right away.
5.
The display (Figure 17, pos. 2) will show the
ambient temperature.
Set the day and time
1.
Press and hold the SET button until SET appears on the display. The day indication row
(Figure 6, pos. 4) will blink.
2.
Press the PLUS or MINUS button to select the current day, from 1 (Monday) to 7
(Sunday).
3.
Press the SET button to confirm. The hours will blink.
4.
Press the PLUS or MINUS button to select the current hour, from 1 to 24.
5.
Press the SET button to confirm. The minutes will blink.
6.
Press the PLUS or MINUS button to select the current minute, from 1 to 59.
7.
Press the SET button to confirm. The day and time are set.
you operate the device with dry hands;
the device is clean and dry;
the device is not damaged;
the device is not covered or blocked;
the device is securely installed.
Figure 17
37
Werbung
