Herunterladen Inhalt Inhalt Diese Seite drucken

Important Information; Parts Names And Handling Instructions - Panasonic NT-DP1 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für NT-DP1:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 9
Safety Precautions
Pay attention to the appliance when it is in use.
(It may cause fire.)
When leaving it, turn the power off.
Make sure the crumb tray is clean and set correctly
when using the appliance.
(It may cause fire or injury.)
Unplug and allow the appliance to cool down fully
before cleaning and storing away.
(It may cause burns.)
Do not move the appliance while it is hot.
Press down the toast lever only for toasting, never
block it.
(It may cause burns.)
Make sure to clean the appliance after every use.
(Otherwise It may cause smoke or fire.)

Important Information

Do not drop the appliance to avoid damaging it.
Do not turn on the appliance for purposes other than toasting or
warming up bread.
Do not turn on the appliance if the insertion slots are covered
with bread.
Do not toast anything other than breads, for example pastries.
This appliance is not intended to be operated by means of an
external timer or separate remote-control system.
Do not move the appliance by holding the levers, warming rack
or insertion slots.
10
Please make sure to
follow these instructions.
CAUTION

Parts Names and Handling Instructions

The illustrations inside mainly show model NT-ZP1.
Please remove the protection seals from the appliance before use.
Insertion slot
Warming rack lever
Crumb tray
 ●
Slide out to remove.
NT-ZP1
Browning control
Cord storage
 ●
Store the mains lead
as illustrated. Do not
set the mains lead in
the opposite direction.
Before you store the
mains lead, clean the
toaster as crumbs
may spill out. (P.14)
Note
 ●
When using the toaster for the first time, there may be a small amount some smoke or smell. This will disappear
with usage.
 
Size of bread
Thickness:
Insert the bread with the longer side facing down.
1~2 cm
If the bread is too large, thick, thin or bread with uneven surfaces, it may get
jammed or caught inside of the toaster.
If the bread is too small, it may get caught inside of the toaster or pop it up.
If bread gets jammed, unplug the toaster, let it cool, and carefully remove the
8~12 cm
bread. Otherwise it will keep toasting. Don't use anything sharp to remove the
bread, you'll damage the heating elements.
8~13 cm
Warming rack
Toast lever
Browning level
indicator (For NT-ZP1)
Defrost indicator
(For NT-ZP1)
Reheat indicator
(For NT-ZP1)
NT-DP1
Browning level
indicator
Mains plug
* The shape of the mains
plug may be different
button
from illustration.
Defrost button
Mains lead
Reheat button
Stop button
 ●
Before using the toaster,
adjust the length of the mains
lead in these places.
11

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Nt-zp1

Inhaltsverzeichnis