Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Taking measurements
• To measure moisture, you must first select the required mode.
Then push the test prods into the object you wish to measure.
The reading appears on the display. If the display shows "OL"
(Out of limit) the moisture of the object is beyond the
measurement range.
• For ambient temperature measurements, you can read the
temperature from the display immediately after you select the
correct mode..
Automatic switching off:
The device switches off automatically after 15 seconds if no
measurement is taken.
Humidity content in weight percent
Humidity status
Inoffensive
Borderline
Too humid
ProfiScale DRY PS 7400
Wood
2 – 15 %
15 – 19 %
> 20 %
Screed, gypsum, plaster
0,2 – 0,3 %
0,4 – 0,9 %
> 1,0 %
English | 11
Werbung
