RPB L4 LIGHT Bedienungsanleitung Seite 6

rpb '4 LIGHT
INSTALLATION AND
FIGURE 1.9
To recharge the battery, disconnect it from the
light power cable, and connect the charging
cable provided. Now plug the charging cable
to the Main Power outlet and press the power
button on the battery pack. This will charge
the unit.
FIGURE l. II
Place the new Outer Lens onto
1.4 T"Light unit and press firmly into place so
that the side clips snap lock into position.
6
USE CONTINUED
FIGURE
Remove
light unit bu unclipping it from the sides.
Excessive
efficiency of the brightness of the light and
format of the light.
FIGURE 1.12
the front of the Clean the 1.4T"Lights Unit with a damp cloth
and mild detergent.
Warning: Do not use Volatile Chemicals or
submerse the 1.4" Lights in water as it mau
cause injury or death from electric shock.
1.10
the old Outer lens from the
wear of this item will effect the