+GF+ EA25-250 Bedienungsanleitung

Electric actuators type EA25-250:
Electric actuators
Monitoring
Monitoring
Instruction Manual
Instruction Manual
The technical data are not binding and not expressly
warranted characteristics of he goods. They are
subject to change. Our General Conditions of Sale apply.
Using the monitoring, the instruction
actuator type EA 25-250 must be observed.
Intended use
Accessory board Monitoring
The monitoring can be used with the electric actuators type EA25, EA45, EA120
and EA250, both with the 241/ AC/DC as well as the 100-230V AC version.
board is to be plugged nto the housing of the actuator in the provided slots.
Description Code
Monitoring
199 190 602
1 Function
The monitoring enables four functions: Cycle time extension. Cycle time
monitoring, Cycle counter and Motor current monitoring.
1
2
3
4
Nr. Description
Cycle time extension
2 Cycle time monitoring
Cycle counter
3
Monitoring a selected maximum number of cycles
Motor current monitoring
4
Monitoring a selected maximum
2 Assembly of the monitoring
A CAUTION!
Disconnect the actuator from the supply voltage.
Remove housing cover of the electric actuator (loosen the 4 screws,
open cover).
type EÄ25-250:
manual of the elect
c
Via the BCD switches 1 to the
monitor settings are made. The
different functions work
ndependently of one another.
motor current
board
700278094
GEDO 6/430/ DE EN/ 06 (09.20231
O Georg Fischer Piping Systems Ltd
CH-8201 Schaffhausen/Switzerland
Georg Fischer Piping Systems
Phone +41 (0)52 631 30 26 / info.psßgeorgfischer.com
The
2. Take the monitoring board out of the packaging and check for
damages.
CAUTION!
Do not touch the board itself. Electrostatic discharge can damage the
components.
3. Insert board vertical
plug.
A CAUTION!
Ensure that the board sits in the lateral guides and snaps.
o
Make desired settings according to 3 "Settings'
4.
5. Stick scheme label •nto housing cover.
6. Put the cover back in place and tighten the screws with 1 Nm.
Ltd CH-8201 Schaffhausen
/ www.gfps.com
on the backside of the main board onto the red