Connecting Power - Dedicated Micros Sprite Benutzerhandbuch

Camera Switch Pulse (VEXT)
Connect the "Signal" from "CAMERA SWITCH OUT" on the video recorder, to the auxiliary terminal marked "AUX +" on the
System Sprite (item 2 on page 5). Connect the "GROUND" from "CAMERA SWITCH OUT" on the video recorder, to the
auxiliary terminal marked "AUX -" on multiplexer. These connections automatically synchronise the System Sprite to the current
VCR speed.
Connecting System Controller keyboard
The System Sprite Controller keyboard is connected to either of the two c-bus connectors (item 12 on page 5).

Connecting power

Connect the power lead from the external PSU supplied with the System Sprite to the socket marked "Power" (item 13 on page 5)
on the System Sprite. This should be done before applying mains power to the PSU.
Version 1.0 Installing your System Sprite 7