Specifications - Inakustik STAR HDMI SWITCH 4K Bedienungsanleitung

OPER ATION MANUAL STAR HDMI SWITCH 1<2 4K | 3D
Once the source device is turned off or plugged out, the switcher will automatically select the next power-on
source depending on the sequence automatically (input 3 >i nput 2 > input1)
NOTE:
• When the source devices are on the stand-by mode, its power supply should be turned off, otherwise this
switcher can not meet intelligent function.
FEATURES
• Multifunctional on switching : automatically or mechanical
• IR extender receiver
• IR remote(
• Operation up to 3.4 Gbps per lane (10.2Gbps all channel).
• Support up to 48-bit per pixel Deep ColorTM
• HDCP pass-through.
• Supports uncompressed audio such as LPCM.
• Supports compressed audio such as DTS Digital, Dolby Digital (including DTS-HD and Dolby True HD)
• Support Full 3D and 4k*2k 24hz resolution, bandwidth up to 340MHz.

SPECIFICATIONS

SIGNAL INPUTS/OUTPUT
Input DDC Signal
Output Video
OPERATING FREQUENCY
Vertical Frequency Range
Video Amplifier Bandwidth
RESOLUTIONS(HDTV)
Interlaced (50 & 60Hz)
Progressive( 50 & 60Hz)
DIEMSIONS
Size (L-W-H)
Weight (Net)
8
5 volts p-p (TTL)
HDMI
24/30/50/60Hz
3.4Gbps/340MHz
480i,576i,1080i
480p,576p,720p,1080p,4k*2k
80×58×18mm
55g