Herunterladen Diese Seite drucken
USER MANUAL
Hereby, MOB, declares that item MO2291 is in Compliance with the
essential requirements and other relevant conditions of Directive
2014/30/EU. The full text of the EU declaration of conformity is
available at the following internet address: www.momanual.com.
MOB, PO BOX 644, 6710 BP (NL).
PO: 41-XXXXXX
Made in China
loading

Inhaltszusammenfassung für MOB MO2291

  • Seite 1 USER MANUAL Hereby, MOB, declares that item MO2291 is in Compliance with the essential requirements and other relevant conditions of Directive 2014/30/EU. The full text of the EU declaration of conformity is available at the following internet address: www.momanual.com. MOB, PO BOX 644, 6710 BP (NL).
  • Seite 2 MO2291 Electric bottle opener 1. Release button 2. Extract button 3. Battery cover Instructions: 1. Hold the bottle firmly with one hand and hold the wine opener with the other hand. Place the bottom of the opener on top of the wine bottle.
  • Seite 3 2. Insert 4 x AAA batteries according to the positive and negative terminals. Close the battery cover. Notes: • This product is suitable for corks with a diameter from 20mm to 24mm and a height of 44mm. • The product is suitable for wine bottles with a bottleneck outer diameter of not more than 35mm and a bottleneck inner diameter from 17.5mm to 23mm.
  • Seite 4 3. Drücken Sie die Freigabetaste und halten Sie sie gedrückt. Der Korken löst sich automatisch aus dem Öffner. So legen Sie die Batterien ein: 1. Ziehen Sie den Verschluss der Batterieabdeckung mit den Fingern zurück, um die Batterieabdeckung anzuheben. 2. Legen Sie 4 x AAA-Batterien entsprechend den Plus- und Minuspolen ein.
  • Seite 5 Comment installer les piles : 1. Tirez la boucle du couvercle de la batterie avec les doigts pour soulever le couvercle de la batterie. 2. Insérez 4 piles AAA en fonction des bornes positives et négatives. Fermez le couvercle de la batterie. Notes: •...
  • Seite 6 2. Inserte 4 pilas AAA según los terminales positivo y negativo. 5. Cierra la tapa de las pilas. Notas: • Este producto es adecuado para tapones de corcho con un diámetro de 20 mm a 24 mm y una altura de 44 mm. •...
  • Seite 7 20 mm a 24 mm e altezza 44 mm. • Il prodotto è adatto per bottiglie di vino con un diametro esterno del collo di bottiglia non superiore a 35 mm e un diametro interno del collo di bottiglia compreso tra 17,5 mm e 23 mm. •...
  • Seite 8 Instrukcja: 1. Jedną ręką mocno przytrzymaj butelkę, a drugą otwieracz do wina. Umieść dolną część otwieracza na butelce wina. Upewnij się, że otwieracz pozostaje w miarę możliwości w jednej linii z butelką wina. 2. Naciśnij i przytrzymaj dolny przycisk i jednocześnie lekko dociśnij otwieracz w dół.