Suaoki S200 Bedienungsanleitung Seite 7

1. Power button
2. Power indicator light
3. DC button
4. DC output indicator light
5. AC button
6. AC output indicator light
Note:
1. If the product malfunctions, error codes would be displayed on screen.
2. Backlight would be turned off by itself when the product remains idle for a certain period of
time. Click on a button to turn on the backlight.
Buttons explained
Power Button
•
1) Power on: Long press the power button for over 2 seconds to turn on the product. The
corresponding indicator light would be on and the LCD screen would light up.
2) Power off: Long press the power button for over 2 seconds to turn off the product and the
LCD screen. The corresponding indicator light would be off.
DC Button
•
1) Turn on DC output: Long press DC button for over 2 seconds to turn on DC output. The
corresponding indicator light would be on and 'DC ON' would be displayed at the LCD screen.
2) Turn off DC output: Long press DC button for over 2 seconds to turn off DC output. The
corresponding indicator light would be off and 'DC OFF' would be displayed at the LCD screen.
AC Button
•
1) Turn on AC output: Long press AC button for over 2 seconds to turn on AC output. The
corresponding indicator light would be on and 'AC ON' would be displayed at the LCD screen.
2) Turn off AC output: Long press AC button for over 2 seconds to turn off AC output. The
corresponding indicator light would be off and 'AC OFF' would be displayed at the LCD
screen.
Note: When the product is not turned on, DC/AC output would be disabled. When the product is
turned on, DC/AC output is turned off by default. You need to long press POWER button to turn
on the product and then long press the DC/AC button to turn on output.
Operation Guidance
Attention:
1.The operating environment should meet our requirement.
2. Make sure that the air inlet/outlet is not blocked.
• How to charge the product
Note: Please fully charge the product before use.
There are 3 ways to charge the product, using AC adapter, solar charging cable or car charger. First,
you need to determine the input source and select a charger accordingly. Then, connect the charger
to the input port of the product to start charging. When the product is being charged, the battery icon
would flash on the LCD screen. When it is fully charged, the battery icon would stop flashing.
7. AC output power
8. AC ON/OFF
9. DC output power
10. DC ON/OFF
11. Charging power
12. Battery status indicator
EN-4