Ashdown Engineering LOMENZO MEGA DRIVE Benutzerhandbuch Seite 5

ASHDOWN ENGINEERING - LOMENZO MEGA DRIVE
REAR PANEL
JACK INPUT
Use this to plug your instrument cable in or plug in from another pedal output.
JACK OUTPUT
This is a jack output to your amp or another pedal on your board.
9V
9v power supply input for use with 2.1mm Plug 9V Centre pin NEGATIVE @ 50 mA.
LOMENZO MEGA DRIVE
USER GUIDE
SPECIFICATIONS:
Inputs
Input
Power Supply
2.1mm Plug 9V Centre pin NEGATIVE @ 50 mA.
Best results will be obtained with a LINEAR regulated supply ( i.e. transformer type
),the use of switching type adapters may lead to the introduction of unwanted
noise.
IMPORTANT! Use correct POLARITY Power Supply, the use of the wrong power
supply will invalidate the warranty and repairs required due to the use of the
wrong supply may incur a charge.
Impedance - 3.9M ohms Input impedance 100k
USER GUIDE