Audio Pro LV-Sub-Flat Bedienungsanleitung Seite 8

HOw tO cHange HOuse cOde On tHe lv-suB
HOw tO cHange ZOnes fOr tHe lv-suB
8
pusH sHOrt tO tOggle Between HOuse cOde 1, 2
Or 3 (alsO sHOwn On frOnt display)
the House code selector is located on the rear panel
of the lv-suB flat. set the same number (1, 2 or 3) as
on the tX100/tXd200 transmitter. the House code can
be likened to a channel via which wireless signals are
transmitted.
within the network, music can be sent simultaneously from
3 different audio sources.
pusH sHOrt tO tOggle Between ZOnes a, B Or c
(alsO sHOwn On frOnt display).
the Zone selector is located on the rear panel of the lv-suB
flat. set the same letter (a, B or c) as the other loudspeakers
you wish to have in the same zone.
a House code (channel) can be divided up into a total of 3
zones. you can control the volume level of these zones indi-
vidually using the remote control. you can, for example, have
one volume level in the kitchen, another in the living room,
and a third in the bedroom.