Inhaltsverzeichnis
Werbung
set to come out of the program mode.
CL-350A Calibrator OPERATOR
'S MANUA
L
24
V, for 3
button,' ,and press the up arrow button, A, until ALL is displayed.
16. Press both the arrow buttons, A
&Press and hold the star
LOCK will be displayed.
V,
for 10 sec.
14.Press and hold both the arrow buttons,
A
UEr is displayed.
13.Press the up arrow button, A, until
' , and press the up arrow button, A, until 3 is displayed.
12.Press and hold the star button,
LEULis displayed.
V, until
l.When you have set the units you require:
Press the down arrow button,
"F only.
1
"C or
V. to select
lO.Press the star button,*, and the up or down arrow button,
A
or
v, until 2 is displayed.
9. Press and hold the up arrow button, A, until unit is displayed.
v, until LEUL is displayed.
8. Press and hold the star button, ' , and press the down arrow button,
nonE is displayed.
7. Press the down arrow button on its own,
v, until
LOCK will be displayed.
6. Press and hold the star button,*, and press the down arrow button,
V, for 10 sec.
UEr is displayed.
5. Press and hold both the arrow buttons, A
v.
LEUL will be displayed.
3. Press and hold the star button,
??
, and press the up arrow button, A, until 3 is displayed.
4. Press the up arrow button on its own, A, until
tunE will be displayed.
2. Press the down arrow button,
v, for 3 sec.
will have to follow this procedure:
Be
careful not to change any of the other settings!
The correct values are given below so that
should you accidentally change one you can correct it.
1. Press both arrow buttons, A
"F
If you wish to change the display units then you
"C to
Changing from
Werbung
Inhaltsverzeichnis
