Dangbei Atom Bedienungsanleitung Seite 18

7. Autofocus failure
Ensure that the Camera/TOF on the front panel is not blocked or dirty.
a
b. The best autofocus distance
8. Smart Eye Protection failed
Ensure that the Camera/TOF on the front panel is not blocked or dirty
a
b. The optimal sensing range is located around the center of the image. Being too close to the edges may result in the eye protection
feature not triggering
9. Intelligent Screen Fit failure
Ensure that the projector is correctly positioned, so that the projected image extends beyond the edges of the screen
a
Ensure that the projection screen has a colored border/frame on all four sides, so that the projector can recognize the frame
b
Ensure that the red box pattern is within the screen frame, and is not blocked
c
10. The Remote Control is unresponsive
a Ensure that the remote control is successfully paired via Bluetooth. If the pairing is successful, the LED light will flash once when you
press any button. When you press and hold any button, the LED light will remain solid
b.lf the pairing is unsuccessful, the LED light will flash three times when you press any button. When you press and hold any button, the
LED light will flash three times and then remain solid
c. Check if the power indicator is still on without pressing any buttons. If it is, check the status of the remote control buttons to ensure
they are not being pressed
d. Ensure that there are no interferences or obstructions between the projector and remote control
e. Check the battery and installation polarity
11. Connect the Bluetooth devices
Enter settings, open the Bluetooth option to check the Bluetooth device list, and connect the device
12. Others
Please feel free to contact us at support@dangbei.com
is 2.0-4.0m, horizontal ±200
16