Sylvox RT22R3CNDA Bedienungsanleitung Seite 9

Vorschau ausblenden Andere Handbücher für RT22R3CNDA:

Verfügbare Sprachen

Quick Set-Up

Set-Up for Satellite Reception

The "First Time Installation" Menu is automatically displayed in the first time switch on.

Select menu Language and Country;

Press OK;

The Tuning Setup Menu is displayed.

Select DTV or ATV + DTV as the receiving mode (Tune Type);

Select Satellite as the input source (Digital Type);

Select the desired satellite (ASTRA/HOTBIRD are standard);

Press OK;

First Time Installation Dialogue is displayed.

Select Yes to load the preset channel list (for ASTRA and HOTBIRD), your television set is

ready. Select No to perform a manual search for channels on the previously selected satellite.

Initial Installation for Reception via DVB-C/DVB-T

DVB-C: Connect the DVB-C coaxial cable in the DVB-C input of the television set, or DVB-

T/T-2 HD coaxial cable in the DVB-T input of the television set. If using an active antenna

without independent power supply, in the menu switch the "5V antenna power" On

(Channel Menu);

Turn on the television set with the on/off switch and press the POWER button on the remote

control or on the device;

The "First Time Installation" Menu is automatically displayed in the first time switch on;

Select the menu Language and Country;

Press OK. The Tuning Setup Menu is displayed.

Select DTV or ATV + DTV as the receiving mode (Tune Type);

Select the input source (Digital Type), DVB-T;

Press OK.

The station search dialogue box is displayed "Auto Tuning Status" . The TV and radio station

search may last several minutes. Your television set is ready for use.

Rt24r3cnda