Sylvox RT22R3CNDA Bedienungsanleitung Seite 11

Manual Analogue Search
In the Channels Menu select ATV Manual Tuning, the Menu ATV Manual Tuning is displayed.
Enter and confirm the desired settings.
Manual DVB-C Search/Manual DVB-T Search
In the Channel Menu select the CADTV Manual Tuning if on cable, or DTV Manual Tuning
if receiving via antenna.
The Menu CADTV Manual Tuning or DTV Manual Tuning is displayed.
Managing List of Channels
In the Channel Menu select Program Edit, the Program Edit Menu is displayed.
The following options are available:
Delete channels (red button on the remote control);
Move channels (yellow button on the remote control);
Skip channels (blue button on the remote control);
Add channels to favourites list (FAV button on the remote control).
Note
Please follow the instructions at the bottom of the screen.
Satellite Configuration
In the Channel menu select Dish Setup, the Dish Setup Menu is displayed. The following
options are available:
Edit/add/delete satellite;
Edit/add/delete transponder;
Edit satellite setting (for example DiSEQc setting).
Column
Satellite list. The satellite settings can be edited (green button).
It is also possible to delete satellites (red button) and to add
Satellite
satellites (yellow button).
List of the transponders corresponding to the selected satellite
("Satellite" column). The transponder settings can be edited
Transponder
(green button). It is also possible to delete transponders
(red button) and to add transponders (yellow button).
List of the settings for the selected satellite ("Satellite" column).
Satellite settings (3rd column)
Configure the DiSEqC function to guide a compatible satellite
antenna.
16
Explanation
Picture Menu
Call up the Main Menu by pressing the MENU button (control panel on the television set or
remote control);
Select Picture and confirm with the OK button, Menu Picture is displayed. Important function in
the Picture menu: Customizing picture setting.
Note
Customizing picture settings is only possible in Personal mode.
Function
Standard (pre-configured settings)
Mild (pre-configured settings)
Picture Mode
Personal (settings can be adjusted amually)
Dynamic (pre-configured settings)
Setting contrast
Contrast
Brightness Setting brightness
Setting colour ratio
Colour
Setting tint(NTSC only)
Tint
Sharpness Setting picture sharpness
Setting colour temperature:
Normal
Colour temp
Warm
Cold
Setting noise reduction
Low
Noise Reduction Medium
High
Off
Screen Setting position and size of the PC image
On
Dynamic CR
Off
Face Colour Setting skin tones
Aspect ratio 16:9 – 4:3 – Auto – Zoom1 – Zoom2
Is displayed when no signal available
Blue screen On
Off
Explanation
17