Thank You; What Your Headset Can Do; Getting Started; Charge Your Headset - Jabra BT150 Benutzerhandbuch

Thank you

Thank you for purchasing the Jabra BT150 Bluetooth® Headset. We hope you enjoy it!
This instruction manual will get you started and ready to make the most of your headset.
!
Remember, driving comes first, not the call!
Using a mobile phone while driving can distract you and increase the likelihood of an
accident. If driving conditions demand it (such as bad weather, high traffic density,
presence of children in the car, difficult road conditions), pull off the road and park before
making or answering calls. Also, try to keep conversations short and do not make notes or
read documents.
Always drive safely and follow local laws.
About your Jabra BT150
1 LED light
Blue indicates mode
(pairing, active or standby)
and battery charging
Red indicates low battery level
2 Volume up (+), volume down (–)
3 Charging socket
4 Answer/end button
Press to turn headset on
Press and hold to turn headset off
Tap to answer or end a call
Press this, and press volume up (+) button at same time, to
put headset in pairing mode
5 Earhook – gently flip and rotate 180° to fit left ear. (See fig. 2)
2
1
4
2
3
5

What your headset can do

Your Jabra BT150 lets you do all this:
• •
Answer calls Voice dialing (phone dependent)
• •
End calls Last number redialing
•
Reject calls (phone dependent)
Specifications:
•
Talk time/standby time 4-6 hours talk time (subject to phone), 110 hours standby
•
Rechargeable battery with charging option from AC power supply or car charger
(not included)
•
Weight 18 g
•
Operating range up to 33 feet / 10 m
•
Headset and hands-free Bluetooth profiles
•
1
Bluetooth specification (see glossary) version 1.2

Getting started

The Jabra BT150 is easy to operate. The answer/end button on the headset performs
different functions depending on how long you press it.
Instruction: Duration of press:
Tap Press briefly
Press Approx: 1 second
Press and hold Approx: 5 seconds
1

Charge your headset

Make sure that your Jabra BT150 headset is fully charged before you start using it. Use
the AC adaptor to charge from a power socket. Connect your headset as shown in fig. 3.
When the LED is solid blue, your headset is charging. When the solid blue LED turns off,
it is fully charged.
3