Tenda 4G03 Bedienungsanleitung Seite 5

I. Set up the router
Attach the antennas to the router. (Skip this step if your router does not have detachable antennas.) Position
1
the antennas vertically.
Insert a SIM card (direction: see silkscreen) into the slot on the bottom panel of the router until you hear a click.
2
12345A
6789
✓
Standard SIM card (Mini SIM card)
Use the included power adapter to connect the PWR jack of the router to a power source.
3
Press the ON/OFF button down to turn on the router. The power LED indicator (
4
Wait a few seconds. The router is connected to the internet when the internet LED indicator (
II. Connect clients to the internet
Connect your wired device, such as a computer, to the LAN port of the router using an Ethernet cable.
Connect your wireless device, such as a smartphone, to the Wi-Fi network of the router using the Wi-Fi Name
and Wi-Fi Key labeled on the bottom panel of the router.
To further configure the router, such as changing the Wi-Fi name and Wi-Fi key, log in to the web UI of the
router by visiting tendawifi.com on a connected device or download the Tenda WiFi App by scanning the QR
code below.
FAQ
Q1: The internet LED indicator (
A1: Try the following solutions.
Check that your SIM card supports Long Term Evolution (LTE) or Wideband Code Division Multiple Access
(WCDMA).
Check that your SIM card is in your service area of the Internet Service Provider (ISP).
Check that your SIM card balance is sufficient.
Start a web browser on the device connected to the router, and access tendawifi.com. Then, solve the
problem as prompted on the page.
Confirm with your ISP if you are in a roaming service area. If yes, log in to the web UI of the router and
navigate to Internet Settings to enable Data Roaming.
If the problem persists, contact our technical support.
Q2: I cannot access the web UI of the router by visiting tendawifi.com. What should I do?
A2: Try the following solutions.
If you log in with mobile clients:
Ensure that your wireless device is connected to the Wi-Fi network of the router.
Disable the cellular network of your wireless device.
Clear the cache of your web browser or change another web browser and try again.
If you log in with computers:
Ensure that the computer has connected to the router properly.
Ensure that the IP address of your computer is 192.168.0. (
replug one end of the Ethernet cable between the router and the computer, and try again.
Clear the cache of your web browser or change another web browser and try again.
If the problem persists, refer to Q3 to reset the router and try again.
Q3: How to reset the router?
A3: When the device completes startup, hold down the RST/WPS button for about 8 seconds, and release it
when all LED indicators light off and then light up. The router will be reset successfully in about two minutes.
+
✓
Micro SIM card + adapter
Tenda WiFi App
) does not light solid on. What should I do?
- 3 -
Nano SIM card + adapter
) lights up.
X X ranges from 2 to 254). If not, unplug and
+
✓
) lights solid on.