Tenda 4G03 Bedienungsanleitung Seite 4

English
Package contents
Content
4G LTE router x 1
Power adapter x 1
Detachable antenna x 2
Ethernet cable x 1
Telephone cable x 1
Quick installation guide
LED indicators
LED indicator
Power LED indicator
Internet LED indicator
Wi-Fi LED indicator
Ethernet port LED indicator
Signal strength LED indicator
Button & port
Button/Port Description
ON/OFF Power button
PWR Power jack
Used to reset the router, or start WPS negotiation of the router.
•
•
RST/WPS
- LAN port in 3G/4G router mode
WAN/LAN
- WAN port in wireless router mode
LAN port by default.
- LAN port used to connect wired devices, such as a computer
LAN
- IPTV port to connect to the set-top box when IPTV function is enabled in wireless router
Telephone port
TEL(4G06)
Used to connect to a landline phone for voice service.
Antenna socket Used to connect to the detachable antennas to enhance the 3G/4G signal.
Model
Status
Solid on
Off
Solid on
Off
Solid on
Blinking
Off
Solid on
Off
3 bars
2 bars
1 bars
Off
The buttons and ports may vary with models.
Reset: Hold down the button for about 8 seconds, and release it when all LED indicators
light off and then light up. The router is reset.
WPS: Press the button, and the Wi-Fi LED indicator (
can enable the WPS function of the client device (such as a smartphone) to
connect to the Wi-Fi network of the router without entering the Wi-Fi password.
mode
4G03 4G06
X
X
Description
Powered on
Powered off
Connected to internet
No internet access
Wi-Fi enabled
Ready for WPS negotiation
Wi-Fi disabled
Device connected to the Ethernet port
No device connected to the Ethernet port
Excellent signal
Good signal
Fair signal
No signal
- 2 -
4G06C/4G07/4G09
X
) blinks. Within 2 minutes, you