Gladen ONE 165 Golf 7 Anleitung Seite 8

8
1
The following installation guide is only an example, because is exist several different types of the Golf VI:
with three or five doors or special edition, furthermore changes in the models as well. Thereby are a lot of
variations possible.
Technical data:
2-way speaker system
2x 140/100 Watt music/capacity
Impedanz 4 Ohm
4-point adjustable Plug and Play crossover
content of box:
2 pc. 165 mm deep-middlespeaker
2 pc. 25 mm textile-tweeter
2 pc. Heat shrink tube crossover
2 St. montagering for the woofer
4 montageriveting
The crossover
All cable and clips are assembled, that the clips are only applies to the belonging speakers.
There is the possibility to affect the highlevelarea by cutting the cableloop on the side.
Important: after cutting these, please isolate them.
Blue cable
(cableloop)
Series resistance 2,7
Ohm before the
crossover will be
activated after cutting
through
Possibility of error:
1. tweeter slightly to loud -> cut the blue cabletweeter or voice sizzles -> cut the clear cable
Introduction: Cutting through the blue cable on the drivers side and the clear cable on the co-driver's side
AUDIO SYSTEM EUROPE GmbH, Bertha-Benz-Str. 9, 72141 Walddorfhäslach / Germany
GLADEN AUDIO
X-ION 165 GOLF 6
Installation guide:
Clear cable:
(cableloop)
Series resistance 3,4
Ohm before the
tweeter will be
activated after cutting
through
www.gladen-audio.com