Gladen ONE 165 Golf 7 Anleitung Seite 13

6
right
Now you can start with the final assembly of the door cover.
Connect all plugs with the door cover. Replace the door unlocking device, push the door cover in the
window gasket and place it so the clips can engage.
Don´t forget to remove all screws on the right places.
Security advice:
Only use this system with an amplifier that is matched for this speaker system.
Only assemble this system in this Plug and Play Version. Changes or increments on the crossover can
cause damage to the speaker or also can generate a burning on the speaker.
Never use the speaker without the crossover – they can be damage. This would void the warranty.
Please consider all instructions of the vehicle manufacturer and never make changes, which effects the
vehicle safety.
Listen responsibly. Music played too loud for extended periods can cause hearing damage.
Now connect the tweeter (transparent-red cable
with round pin plug) with the crossover and the
4-pole pin of the VW supply.
Mount the crossover (see arrow) with cable
connector as shown in the illustration. (bundle
the rest of the cable).
Material:
- Cable connector
!
Before you assemble
the doorcover please
check, that all clips
are unlocked.
wrong