Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Get CEC POWER Delay time status
out = {OUT1}; prm = {1,2,3...,} according to the
actual time counter, 1 means 1 minute, 2 means 2
minutes, max. wait time is 30 minutes.
Set Volume to increase via CEC
out = {OUT1}
Set Volume to decrease via CEC
out = {OUT1}
Set Volume to mute via CEC
out = {OUT1}; prm = {OK}
4. RS232
Description
Set RS232's baud rate
prm1 = {115200, 57600, 38400, 19200,
9600,4800,2400}
Get RS232's baud rate
prm = {115200, 57600, 38400, 19200,
9600,4800,2400}
Set RS232's AUTO POWER on /off
prm1 = {on, off}
Get RS232's AUTO POWER status
prm1 = {on, off}
Set delay time für RS232 AUTO POWER on / off
prm = {1,2,3...,} according to the actual time
counter, 1 means 1 minute, 2 means 2 minutes.
Default wait time is 2 minutes, max. wait time is 30
minutes.
Get delay time für RS232 AUTO POWER on / off
prm = {1,2,3...,} according to the actual time
counter, 1 means 1 minute, 2 means 2 minutes,
Default wait time is 2 minutes, max. wait time is 30
minutes.
Set RS232's command
prm1 = {poweron, poweroff, volumemute,
volumeunmute, volumeup, volumedown...}
prm2 = {hex, str} prm3 = {xxxxxxxxxxx}
(max size is 48 byte)
Get RS232's command
prm1 = {poweron, poweroff, volumemute,
volumeunmute, volumeinc, volumedec...}
prm2 = {hex, str} prm3 = {xxxxxxxxxxx}
hex are ASCII characters
Set RS232's command to send
prm1 = {poweron, poweroff, volumemute,
volumeunmute, volumeinc, volumedec...}
5. Network
Description
Set IP mode
prm = {static, dhcp}
Get IP mode
prm = {static, dhcp}
EN
GET AUTOCEC_D
out<CR><LF>
SET CEC_VOL_INC
out<CR><LF>
SET CEC_VOL_DEC
out<CR><LF>
SET CEC_VOL_MUTE
out<CR><LF>
Command
SET UART_B
prm1<CR><LF>
GET UART_B<CR><LF>
SET UARTPWR_FN
prm1<CR><LF>
GET UARTPWR_
FN<CR><LF>
SET UARTPWR_D
prm1<CR><LF>
GET UARTPWR_
D<CR><LF>
SET UART_CMD prm1
prm2 prm3<CR><LF>
GET UART_CMD
<CR><LF>
SET UART_CMD_S
prm1<CR><LF>
Command
SET IP MODE
prm<CR><LF>
GET IP MODE<CR><LF>
AUTOCEC_D out prm<CR><LF>
CEC_VOL_INC out <CR><LF>
CEC_VOL_DEC out <CR><LF>
CEC_VOL_MUTE out prm<CR><LF>
Example of feedback
UART_B out prm1<CR><LF>
UART_B prm<CR><LF>
UARTPWR_FN prm1 prm2<CR><LF>
UARTPWR_FN prm1 <CR><LF>
UARTPWR_D prm1<CR><LF>
UARTPWR_D prm1 prm2<CR><LF>
UART_CMD prm1 prm2
prm3<CR><LF>
UART_CMD prm1 prm2 prm3
prm4<CR>
UART_CMD_S prm2<CR><LF>
Example of feedback
IP MODE prm <CR><LF>
IP MODE prm <CR><LF>
35
Werbung
