Analog Out; Digital In; Loudspeaker; Mains Connection And Switch - T+A Elektroakustik Caruso R Kurzanleitung

6 ANALOG OUT

ANALOG Analog audio output (Pre Out), for connecting e.g. active loudspeakers. The level of this out-
put is variable.
SUB
Headphones

DIGITAL IN

7
USB
COAXIAL
OPT

8 LOUDSPEAKER

One pair of speakers can be connected (
Connect the red terminal marked „+" to the corresponding terminal marked on the speaker
and the black terminal marked „-" to the corresponding „-" terminal on the speaker. Screw
the terminals tight and make sure that there are no short circuits.
All four terminals carry voltage! Never connect the right output terminals to the left output
terminals!

9 MAINS CONNECTION and SWITCH

The mains cable is plugged into this socket. The switch disconnects the device from the
mains.
Notice When the main power switch is turned off, the unit is not completely disconnected from the
mains. To disconnect the unit completely from the mains, the mains plug must be with-
drawn.
4
Output socket for an active subwoofer.
The connection of a subwoofer is optional.
Socket for stereo headphones.
Connection socket for a USB memory stick or an external hard drive.
Input for digital source devices with electrical coaxial digital output.
Input for digital source devices with optical TOSLINK digital output.
1
5
2 7
9
RIGHT and
3
6
8
LEFT).
Notice
Do not connect the
CARUSO R and the
other components
to the mains until
all necessary con-
nections between
the devices have
been established.
33