T+A Elektroakustik Caruso R Kurzanleitung Seite 28

Notes
This Quick Start Guide describes the steps necessary for the
first start-up and usage.
A detailed user manual can be found here
www.ta-hifi.de/en/support/CARUSO-R/support-CARUSO-R/
The information in this user manual are marked as follows:
:Caution
Risk of injury
Firmware updates
Symbols and notes on the back of the CARUSO R
28
Notice
Risk of damage of objects
If the CARUSO R is connected to the Internet, the device checks after powering-on from
Eco-standby whether a new software version is available for the device. If a newer firm-
ware is available, the CARUSO R starts the update automatically.
The progress of the update is shown on the display. Wait until the process is completely
finished. This may take a few minutes.
ATTENTION!
The device carries hazardous voltages inside the enclosure. Therefore the device must not
be opened. There is a risk of fatal electric shock.
The device may only be opened by a qualified specialist. Repairs and the replacement of
fuses must be carried out by an authorised specialist workshop. Apart from the procedures
described in the operating instructions, no other work may be carried out on the unit by the
user.
Attention high voltage!
This symbol indicates hazardous voltages.
Caution!
Instructions marked with this symbol must be strictly observed for trouble-free and safe
operation of the device.
This symbol marks direct voltages (DC).
Only connect devices to sockets with this symbol that are suitable for the specified voltage.
This symbol marks alternating voltages (AC).
The AC voltage required for the device can be found on the printing at the mains input so-
cket. Do not connect the device to other power supplies.
This symbol marks the protective earth connector (ground connection).
The unit is designed for operation at a protective earth conductor socket.
This symbol marks text pass-
i
ages that provide you with ad-
ditional notes and background
information and are intended
to facilitate understanding.