Safety In The Work Area - Rusta Dac 320El Bedienungsanleitung

EN
Use the chainsaw with
Do not operate the
both hands chainsaw with one hand
Do not expose the
machine to the rain.
2.2. WARNINGS
Before using the product
1. Before using our products, please read this manual carefully to understand how to use it.
2. Never use the chainsaw while under the influence of drugs that cause drowsiness or under the influence of
alcohol or drugs.
3. Never mow in high winds, bad weather, or when visibility is poor or in extreme temperatures. Always check
that there are no dry branches that could fall during cutting.
4. Use appropriate protective equipment, safety glasses, gloves and hearing protection. Do not wear loose
clothing. Make sure hair, clothing and gloves are far enough away from moving parts. Loose clothing, jewelry
and long hair can get caught in moving parts.
5. Do not allow other people to be in front of the chainsaw when starting the engine or cutting wood. Keep these
people or animals away from the work area. Children, animals or other people must be at least 10m away when
starting or operating the chainsaw.
6. Never start cutting until you have a clear work area, protective footwear and a planned fallback route.
7. Always hold the chainsaw securely with both hands when the engine is running.
8. Keep your body away from the chainsaw when the engine is running. Before starting the chainsaw, make
sure that it is not in contact with any object.
9. Check the chainsaw before each use. Never use a chainsaw that is damaged, improperly adjusted, or not
fully and securely assembled. Make sure the chain stops moving when the control brake is released.
10. Always stop the engine before putting the chainsaw down.
11. Be extremely careful when cutting small branches as they can get caught in the chainsaw and thrown
towards you.
12. When cutting a live branch, be careful that it does not ricochet when the tension is released.
13. Beware of recoil. Kickback is the upward movement of the guide rail that occurs when the saw chain at the
tip of the guide rail contacts an object. Kickback can result in loss of control of the chainsaw.
14. When transporting the chainsaw make sure you have the proper guard for the guide rail. Proper handling
of the chain saw will reduce the likelihood of accidental contact with the chain.
AVOID CUTTING:
♦ Processed timber.
♦ Through soil.
♦ Wire fences, nails, etc.
2.3. GENERAL SAFETY WARNINGS FOR POWER TOOLS
Warning! Read all safety warnings and instructions. Failure to follow the warnings and instructions listed below
may result in electric shock, fire and/or serious injury.
Retain all warnings and instructions for future reference. The term "power tool" in all warnings listed below refers
to the mains powered (corded) power tool or the (cordless) battery powered power tool.

SAFETY IN THE WORK AREA

a. Keep the work area clean and well lit.
b. Do not operate power tools in explosive atmospheres, such as in the presence of explosive liquids, gases, or
dusts. Power tools generate sparks that can ignite dusts or vapors.
c. Keep children and bystanders away while operating a power tool. Distraction can lead to loss of control.
3