Pepcare 15133022 Bedienungsanleitung Seite 24

DANGER! Risk of electric shock
• Do not operate the device if the device, the wall power
supply or the cable shows visible signs of damage or if
the device has been dropped.
• Connect the cable to the device before plugging the wall
power supply into a socket.
• Only connect the wall power supply to a properly installed easy
to access socket which supplies voltage matching the rating plate.
The socket must still be easily accessible after connection.
• Ensure that the cable cannot be damaged by sharp edges or hot
surfaces.
• Ensure that the cable is not trapped or crushed. Do not wrap the
cord around the appliance or the wall power supply (risk of cable
break!)
• Always pull at the wall power supply and never pull on the cable
when unplugging the wall power supply.
• Remove the wall power supply from the socket ...
... after each use,
... after each charging process,
... if a fault occurs,
... before cleaning the device and
... during thunderstorms.
• To avoid any risk, do not make any changes to the device or acces-
sories. Do not replace the cable yourself either. Repairs should only
be carried out by a specialist.

24