Fuxtec FX-RL400 Bedienungsanleitung Seite 14

1. Unscrew the large nut (D) and the washer (C) from the wheel axle, attach the left and right frame (B) to the
main unit (A) and slide the large nut (D) and the large washer (C) across the wheel axle on two sides. Ensure
that the fastenings are tight and correctly tightened.
Use parts (E), (F) and (G) to screw the left and right frame (B) to the tube (C). Ensure that all fastenings are
2.
firmly tightened.
3. Assemble the pipes (H), (I) and (J). Please ensure that the tubes are firmly seated before proceeding to the
next step.
4. Ensure that all fixings and components of this product are tight and secure before using it.
Warning
Avoid contact with the ventilation spikes. These are sharp and can cause serious injury if not used correctly.
Maintenance
Please clean the ventilation mandrels and wheels carefully after use. Store in a dry place. In order to ensure that the
appliance remains in perfect working order, please lubricate all moving parts regularly with a little conventional oil.
Manual_FX-RL400_Int24_rev4
14