BEARWARE WECKER Bedienungsanleitung Seite 11

5. Key functions
"ALARM" • Press and hold to call up the alarm settings for the alarm
button • Press to switch the alarm on or off
• Increase the desired value (e.g. alarm time, time)
"UP" button
• Switch 12/24 hour display
"DOWN" • Decrease the desired value (e.g. alarm time, time)
button • Switch between °C/°F
"SET" button • Press and hold to access the clock settings
"Snooze/ • Activating the snooze function
Light" button • Activating the backlight
"SENSOR" Switch light sensor on or off. Switches the backlight on or off
switch depending on the brightness.
6. Start-up
Remove the device from the packaging and remove all packaging material. Open
the battery compartment on the back of the device and insert 3x 1.5V AAA bat-
teries. Ensure that the polarity of the contacts is correct. Then close the battery
compartment.
6.1 Date and time setting
Press and hold the „SET" button in time mode for approx. 3 seconds. The value
to be set starts to flash. The values can be adjusted with the „UP" and „DOWN"
buttons and confirmed with the „SET" button. The setting sequence is as follows:
Hour - Minute - Second - Year - Month - Day - Language (in which the day of
the week should be displayed) - Time zone (the previously set time is changed
according to your time zone settings)
Note: The selectable languages are: German, English, Italian, French, Dutch,
Spanish and Danish
English
11