Werbung
Steelcase recommends having the authorised dealer
or an assembly company assemble the unit.
3.3.1 Setting up and positioning the product
Setup and use of the product require detailed planning.
The partially assembled components for the Flex Kiosk
product are supplied directly by the manufacturer.
The setup location must meet the following requirements:
■
Sufficient carrying capacity of the floor
■
Level placement surface / floor surface
■
Temperature range: +5°C to +40°C
■
Max. relative air humidity: 85%
3.3.2 Notes on installation
Positioning at the set-up location
Do not block sprinklers, maintain minimum 30 cm
clearance.
Flex Kiosk should be easily accessible from all workstations
and can be located throughout the office such as in corridors,
meeting rooms, work cafes, etc.
It is recommended to place Flex Kiosk at a sufficient acoustic
distance of 4 m from other workstations.
3 Transport and assembly
EN
15
Werbung
