TOZO HT2 Bedienungsanleitung Seite 5

TOZO
step 3:
Turn on the Bluetooth on your second mobile phone. Search for the "TOZO HT2" and connect the headphones to the
second mobile phone.
Step 4:
Turn on the Bluetooth on the first mobile phone. Click on the connection record for the headphones to achieve a
simultaneous connection Of the headphones with two mobile phones.
7.0 Charging
When the headphones are either powered on or powered off, plug in a Type-C charging cable, and the headphone power
light will stay red while charging and turn off after fully charged.
(Note: Plugging in the charging cable while the headphones are powered on will result in the headphones automatically
turning off.)
8.0 Aux audio cable
1. When the headphones are powered off, insert a 3.5mm AUX audio cable to play music from a phone or other player to
experience Hi-Res sound quality.
2. When the headphones are powered on, inserting a 3.5mm AUX audio cable will automatically turn Offthe headphones.
(Note: Llsing this function while the headphones are charging is not recommended.)
9.0 Disclaimers
TOZO reserves the right Offinal interpretation Of this manual and the design and specifications are subject to change
without notice.
07
Device B
Device A
roto H Ta rozo H Ta
Device A Device B
10.0 Solutions to common problems
Symptoms Solutions
The battery may be in protection mode Orthe battery may be fully discharged.
NO power on (battery)
Connect the headphones to a wall charger.
On your device.
1: Disable and reænable
Headphones does not
2: Remove the headphones pairing name from the Bluetooth list on your device.
connect to mobile devices
3: Clear the pairing list on your device. Connect again.
1: Make Sure the voice prompt is on, press the button briefly to listen to the
connected
2: Make sure you are using the correct device.
3: please use another
No sound
4: If two devices are connected, pause the audio on the first device and then
play the audio on the other device.
5: If two devices are connected, move the device to within headphones
reception range (wlthin 10m).
1: Please use another
2: Disable any audio enhancements
Poor sound quality
3: If the headphones have been in contact with water, allow them to dry
and try again.
1: Ensure that the connector on the cable is correctly aligned
with the connector on the headphones.
2: Try another charging source.
Headphones won't charge
3: Ensure that the ends of the USB cable are secured.
4: If your headphones has been exposed to high or low temperatures,
wait for it to return to room temperature and then retry charging.
1: Check that the headphones is switched on.
No power after a day
2: Check if the NC is on.
or two in storage
3: Recharge.
1: Try talking again.
2: Try another compatible device.
3: If the headset has been in contact with water, wait for it to
Microphone does
dry and try again.
not receive sound
4: Try moving closer to the headphones while talking.
5: During a call, ensure that the headphones is selected as the audio
source in the current
the Bluetooth function.
device.
music source.
music source.
on the device or music app.
call window.
EN
08