TOZO HT2 Bedienungsanleitung Seite 3

TOZO
• This product contains magnetic material. Please consult your doctor as to whether it will affect implantable
medical devices.
• Please keep this product away from sources of fire and heat. Do not place an exposed flame source
(e.g. a lighted candle) on or near this product.
• Do not modify the product without authorization.
• Do not use this product in conjunction with an inverter.
• Only use this product with a power supply that has been approved by the relevant authorities and meets local
regulatory requirements (e.g. UL CSA VDE, CCC).
• The batteries supplied with this product may pose a fire or chemical burn hazard if not handled properly.
• Do not overheat the product containing the batteries (e.g. keep out of direct sunlight and away from sources
of fire
• If the speaker is exposed to salt or chlorinated water, wash it gently with clean water afterwards to remove
any residue.
• Make sure the connector port is completely dry before charging.
• Do not charge the speaker when it is wet.
1.0 Product description
Active Noise
Cancellation dipswitch
Type-C
charging port
ALIXaudio jack
2.0 Specifications
Speaker size
Battery capacity
Input
Transmission range
03
Safety Instructions
User manual* 1 Quick guide. 1
Play / Pause /
On/Off button
AUX audio
Volume + / Next song
Type-C cable. 1
Volume • / Previous song
@40.0mm
Support TOZO APP
soomAh
0.5A
10m
Charging port
Speaker impedance
Call noise cancellation
3.0 Key function
Press once
o
cable* 1
320
3-Mic ENC call noise canceling
guide
Hold: Press and hold X3: Press three
Press twice
Volume up
Short press to increase the volume by 1 step (total 16 steps).
Next song
Hold
Long press IS to switch to the next song.
Volume down
Short press to decrease the volume by 1 Step (16 steps in total).
Previous song
Hold
Long press IS to switch to the previous song.
Play/Pause
In music mode: Switch between play/pause.
Answer/Hang up
Short press on/off button to answer/hang
Reject
Hold
In phone mode: Long press Z2S to reject the call.
On/Off button
Hold
Press and hold the power button 3S to turn on.
press and hold the power button 3S to turn Off.
Activate the voice assistant
Triple press the power button to wake up the voice assistant.
Restore factory settings
When the headset is switched on. Press and hold the plus and
Hold
minus keys simultaneously for 8 seconds to restore thefactory
settings.
EN
times
up call.
04