TOZO HT2 Bedienungsanleitung Seite 4

TOZO
About normal
After the headphones are powered on, the default mode is normal noise cancellation
mode. A single click of the NC button will turn off the noise cancellation
another single click will enter the transparency
noise cancellation
About return
NC
When the headphones are in the Adaptive Noise Cancelling Mode, double-click the
NC button to return to the Normal Noise Cancelling Mode.
(Note: You can only return to the Normal Noise Cancelling Mode by double-clicking
the NC button in the Adaptive Noise Cancelling
About adaptive
1. When the headphones are in the Normal Noise Cancelling Mode, double-click
NC button the headphones will emit two audio segments within 10 seconds, and then
enter the Adaptive Noise Cancelling Mode.
2. After entering the Adaptive Noise Cancelling Mode, it will replace the Normal Noise
Cancelling Mode, and you can switch between various modes by single-clicking
NC button. (Note: You can only enter the Adaptive Noise Cancelling
double-clicking
4.0 -rozoapp
Download the TOZO App for EQ settings and more.
• EQ settings: There're lots of EQ settings you can choose in the App to optimize your experience while enjoying different
music genres.
• Headphones firmware update: The earbuds firmware can be updated in the App. You will be informed once the new version of
firmware is detected when you connect the headphones with the App.
5.0 TOZO app pairing
Step 1:
TOZO APP can be downloaded from the TOZO website and Google play and Apple APP Store.
Q TOZO
the
App Store
GET IT ON
Google Play
step 2:
Bluetooth pairing with your headphones.
05
noise cancellation mode
mode. Click again to return to normal
mode, and the cycle continues.
to the normal noise cancellation mode
Mode.)
noise cancelling mode
Mode by
the NC button in the Normal Noise Cancelling Mode.
14:50 4
-rozo
< Settings
Tozo HT2
step 3:
open the TOZO APP and pairing With your HT2.
mode, and
the
the
6.0 Bluetooth
Step 1:
Turn on the headphones and enable Bluetooth on your first mobile phone. Search for the "TOZO HT2" and connect to
the headphones.
O Cancel
step 2:
Turn off the Bluetooth function on the first mobile phone to disconnect it from the headphones (do not turn off the
headphones).
multipoint feature
EN
H 12
Device A
Tozo HT2
Device A
06