protect the lifespan of the device, it is recommended not to use it more
EN
than 6 times in a row. Allow the device to cool for 45 minutes after 6
consecutive uses.
Note! It is recommended to chop food into smaller pieces before putting
it in the pitcher. Do not blend large quantities of food at the same time.
PULSE MODE
Set the knob to the pulse mode icon (2, Fig. B). Hold until the desired result
is achieved.
ICE CRUSHING FUNCTION
Place ice in the pitcher and select the speed using the knob to activate the
ice crushing function.
AFTER USING THE DEVICE
1. Turn off the device and unplug the power cord from the electrical outlet.
2. Remove the lid and measuring cup from the pitcher.
3. Remove the pitcher along with its base from the blender.
4. Detach the pitcher base from the blending attachment.
TROUBLESHOOTING
Problem: The device does not work after turning on the power and starting
the device.
Cause:
•
The device is not connected to the power.
•
The pitcher is not properly mounted and secured.
•
The motor has overheated. It stops automatically to protect the device.
•
The blades are blocked.
Solution:
•
Make sure that the device is properly connected to the power source.
•
Ensure that the pitcher is correctly installed.
•
Interrupt the operation and leave the device to cool down for about
30 minutes.
•
Immediately turn off and disconnect the device from the power supply.
Then remove any blockage.
•
Cut large ingredients into smaller pieces before placing them in the