Tivoli Audio ALBERGO Schnellstartanleitung Seite 3

All manuals and user guides at all-guides.com
Albergo Getting Started:
1. Fully extend the telescopic antenna and position
for best reception. The antenna is not intended to
be detached.
2. Plug the Albergo in using the included external
power supply and press the Power button
the remote or briefly press down on the control
wheel on top of the Albergo. Briefly press the top
wheel again to turn the Albergo off.
3. To adjust the volume, rotate the top wheel or use
the Volume buttons
4. Press the Tune or
tune until you find the station you like.
5. Press and hold one of the Preset buttons
on the remote to store the currently
tuned station.
6. For the clock to set automatically, tune to an FM
station with RDS and the time will update automati-
cally within 60 seconds if a time signal is available.
7. With the Albergo on, press the Alarm button
on the remote to access the alarm settings. Use
the Arrow and Menu/Select
adjust and set the alarms. To set the alarms quickly,
press either front panel alarm button and follow the
instructions on the display.
8. When the alarm activates, briefly press the top con-
trol wheel to Snooze, or press the respective front
panel alarm button to turn the Albergo off, or press
and hold down the top control wheel.
9. To access the Main Menu and the EQ, briefly press
the Menu/Select button
the Arrow and Select
and set the various options.
Download the latest, complete multi-language owner's
manual at:
http://tivoliaudio.com/amanual.pdf
on
or on the remote.
buttons briefly to auto
buttons to
on the remote and use
buttons to adjust
Albergo remote control
3 – ENGLISH