MiBoxer C4 Smart Charger Benutzerhandbuch Seite 4

LCD Display
Rich user interface display, the LCD screen displays the states of the
voltage, current, charging time, battery type, internal resistance,
and percentage,
Intuitively. The LCD back light will become dark after 1 minutes if there is no
operation
1st S Ot
Ld-don4aSSV
'dad,n4.20V
IBB% B:BB
Batteries power
percentage
Batteries detection
Batteries activation
When the batteries
When the batteries
Correctly put into the battery, check is 0K, enter into the normal state of
charge
Users Manual
1. Connect the power supply
2. Put the battery in any channel, the charger starts to detect battery related
data and display it on the LCD screen
3. Without any setting the charger will automatical y distribute the charging
current according to the internal resistance of the battery
4.Shortpress@to
be turn on
LiFeP04 / 4 35V Li-ion battery, the charger can not be identified
automatically, you need to manually se ect the battery type
f the LiFeP04 is not set manually, the charger WI charged the
NOTE
battery as Li-ion 4 2V and the battery wi be at risk of explosion
Introduction
which et you understand
2nd sot
C2 C3[7 17] ]
batteries Charging
time
type
and
and detection
is reversed
is short-circuited
switchCI-C4channelandthebacklight o fLCDW
the battery charging
3d slot 4th slot
] C417
batteries
capacity
error
Errors
The current
symbol flashing And show
02
capacity,
state more
resistance
Charging current /
Voltage
charging
symbol
channel's
/
batteries