Triton TCMBS Sicherheits- Und Bedienungsanleitung Seite 8

2. Press the ON/OFF Switch Lock (2) from either side, all the way in
(Image B)
3. Release the pressure on the ON/OFF Switch, which now remains
locked in the ON position
4. To switch the tool OFF, slide the ON/OFF Switch forward until the
ON/OFF Switch Lock automatically disengages
5. Release the ON/OFF Switch
Sanding
WARNING: Do not apply too much pressure on the sander.
Pushing down too hard may cause damage or reduce the life of
the product.
WARNING: Keep hands away from the belt, as it will continue to
move for a short time after the machine is switched off.
• Apply light pressure when the sander is brought into contact
with the workpiece
• Allow the sander to reach full speed before moving it across the
workpiece
• To remove paint or smooth very rough wood, sand across the
grain at 45° in two directions and then finish parallel with the
grain (Image C)
• Use the Front Belt Roller (5) only to sand corners or irregular
shapes (Image D)
• Lift the sander clear of the workpiece before switching OFF
Accessories
• A range of accessories, including a variety of different grade
sanding sheets, is available from your Triton dealer. Spare parts
can be purchased from your Triton dealer or online at www.
toolsparesonline.com
Maintenance
• This tool is manufactured using class-leading components and
makes use of the latest in intelligent circuitry that protects the
tool and its components. In normal use it should provide a long
working life
Cleaning
• Keep your machine clean at all times. Dirt and dust will cause
internal parts to wear quickly, and shorten the machine's
service life. Clean the body of your machine with a soft brush
or dry cloth. If available, use clean, dry, compressed air to blow
through the ventilation holes
Storage
• Store this tool and its accessories after use in its case, in a dry,
secure place out of the reach of children
EN
8
Contact
For technical or repair service advice, please contact the helpline on
(+44) 1935 382 222
Web: www.tritontools.com
UK Address:
Toolstream Ltd.
Boundary Way
Lufton Trading Estate
Yeovil, Somerset
BA22 8HZ, United Kingdom
EU Address:
Toolstream B.V.
Hogeweg 39
5301 LJ Zaltbommel
The Netherlands
Disposal
Always adhere to national regulations when disposing of power
tools that are no longer functional and are not viable for repair.
• Do not dispose of power tools, or other waste electrical and
electronic equipment (WEEE), with household waste
• Contact your local waste disposal authority for information on
the correct way to dispose of power tools