Rollei HS Freeze Q1 Anleitung Seite 31

Operation
Further settings
Swipe from left to right to call up the interface
for further settings . For the setting operations, see
Speedlite mode .
Flash off on master light
Interface for channel setting
Tap to set the channel
Slave mode
Setting the flash parameters in slave mode, as shown
in the illustration . For the operation of the modelling
light, see Speedlite mode .
Other settings
Swipe from left to right to call up the interface for
other settings (as shown in the adjacent illustrations) .
For operation, see Speedlite mode .
Setting the wireless mode:
CH, CH/GR, TTL-All
Click to customise the corresponding
group
31