EDIFIER S360DB Schnellstartanleitung Seite 10

Bluetooth Input
1. Press the " " button on the remote control or the volume adjustment/input selector knob on
the active satellite speaker to select Bluetooth input; indicator on the active satellite speaker
is now lit.
2. Set your Bluetooth device (mobile phone, tablet etc.) to search for and select "EDIFIER S360DB".
Note:
* The Bluetooth on S360DB can only be searched for and connected using Bluetooth input. The
existing Bluetooth connection will be disconnected once the speaker is switched into other
audio inputs. When switched back to Bluetooth input, the speaker will try to connect to the last
connected Bluetooth audio source device.
* Pin code for connection is "0000" if needed.
* To disconnect from the current Bluetooth device, press and hold the "
control for 2 seconds.
* To enjoy all Bluetooth functions of this product, make sure that your audio source device
supports A2DP and AVRCP profiles.
* Bluetooth connectivity and compatibility may be different among different source devices,
depending on the software versions of source devices.
* The built-in Qualcomm® aptX™ decoder in the product helps to achieve better wireless
transmission sound quality, therefore please use the device supporting Qualcomm® aptX™ as
the audio source.
COAX OPT
OPT COAX
PC AUX
AUX PC
or
" button on the remote