TecTake 405220 Bedienungsanleitung Seite 5

Specification
Product name
Model
Voltage
Power
Frequency
Troubleshooting
Common problem
The garment does not heat
The garment steamer does not produce
steam
Water leaks from the water tank
There is a loud buzz or pumping sound
when the garment steamer works
Avoid the discoloration of metal
accessories on the clothing
Spray water from steam outlet
Garment steamer
SG5657
220-240V
1640W
50/60Hz
processing method
●Check whether the plug is inserted correctly.
●Check power supply
●Check the power button.
●Check water level and whether the water tank that
produces steam is properly installed.
●Press hard on the steam button
●Keep the garment steamer upright
●Make sure that water level is not above the highest
water level.
●Please ensure that the water inlet of the tank is
closed properly.
●Keep the garment steamer upright in accordance
with the operation instructions provided.
●Check the water level; if there is no water or the
water level is low, please add water to the water tank.
●Do not use the garment steamer directly on the
metal accessories on the clothing.
●Steam should be used carefully when there are
metal accessories.
●In the cold state, press the power button, let the
machine preheat for 30 seconds at first and then
press the steam switch.
5