Installation And Use - Tectake 405220 Bedienungsanleitung

* Be sure to unplug the power plug before installing cleaned product or disassembling the brush accessories
or filling the tank with water.
* This product can only be used with grounded electrical outlet.
* If the product is hot/connected to the power supply, do not let the steam nozzle contact any surface when
placing the product.
* Check whether the power cord is damaged regularly.
* During the operation of the garment steamer, never let the power cord contact with high temperature steam.
*Please do not use this product when the water tank is running out of water.
* When you leave the product for only a short period of time, please turn off the power supply of the product
and unplug the power plug.
* After ironing, be sure to turn off the power supply of the product and unplug the power plug, and let it cool
down for 60 minutes before cleaning the product, installing or disassembling accessories, emptying the
water tank or storing it.
* This product is for private use only. Please do not use this product in the bathroom or outdoor.
*Please do not drag this product on the floor.
* The steam may damage some walls or doors or cause them to fade.
*According to the design, your product is suitable for running water. If the water quality in the area you live
in is very hard, the scaling may be very fast. Therefore, it is suggested that distilled water should be filled
into the water tank to extend the service life of the product.
* Never put perfume, vinegar, scale remover, ironing agent or other chemicals into the water tank, because
these chemicals are not suitable for this product.
Installation
Before the initial use:
●Remove any labels or protective covers on the head of the garment steamer, straighten and route the
electric wires before using them.
●If it is used for the first time, the garment steamer can blow off some steam for several minutes. This will
remove any impurities and odors that may be left during the manufacturing process.
●To avoid circuit overload, it is recommended not to use the same outlet circuit with other appliances.
●When you open the package of the garment steamer, check all the items and the part list you received
to avoid parts being discarded.

Installation and use

1. Take out the water tank, add an appropriate amount of water to the water tank, load the water tank into
the machine and press it firmly into place.
2. Connect the device to a power outlet and turn on the power. Click on the steam switch to start, the red
light flashes, and the machine starts preheating. The red light is constantly on, and the machine can be
used dry ironing.
3. Press the steam switch again and the blue light will light up (3 steam modes can be selected). Once the
steam is out, it is ready for steam ironing.
4. Press and hold the steam switch for 3 seconds to shut down.
5. In the steam ironing mode, the water tank is short of water, or the water path is blocked, the blue light
flashes and a water shortage alarm will appear. After not using the item for 30 minutes, the item will
automatically power off and shut down.
Garment steamer is very easy to use, it is suitable for ironing wrinkled / creased clothing, curtains and
refreshing decorative fabrics, it can be used on most of fabrics.
Note: Garment steamer is designed for vertical hanging clothes to avoid using garment steamer when
the clothes are in a horizontal position.
1.Check whether it is permeable on the back of the cloth so that the steam is not to be gathered on the
cloth to wet it.
2. Check the pockets of the clothing to make sure there are no items inside.
3